View cart
Shopping cart is empty.
Phone Lyndons hardwaer suppies

LOCATE YOUR NEAREST STORE

Phone, fax or shop online

 

Silasec Masonry Waterproofer

This catalog has no sub-catalogs.
  • Silasec Masonry Waterproofer

    Choose An attribute

    Size

    Item Tags:

    Part No.
    Manufacturer
    Vespol
    Pack Size
    Each

    Qty

     

    Silasec - Waterproofing Cement Paint

    Bondall Silasec is a unique concentrated waterproofer which forms a permanent waterproof barrier on masonry and concrete surfaces. It is capable of handling hydrostatic pressure from both sides and can be applied under wet conditions.

    Silasec is non flexible and contains Calcium Chloride.

     

    step1Preparation

    Clean surface thoroughly to remove contaminants. Do not attempt to waterproof an unsound surface.

    If concrete is smooth the surface should be acid-etched. If acids or detergents are used ensure such materials are removed from the surface and are neutralised before commencing. Before applying saturate the surface with water to minimise its porosity.

    step2Application

    For use as a Cement Paint. By volume, mix 1 part Silasec : 5 parts water : 7 parts fresh GP Portland cement. Add 1 part of BondCrete to the paint to help adhesion.

    step3Drying

    Apply a minimum of three coats at 24-hour intervals.

    Saturate each surface with water before application and only apply to a damp surface.

     


    Features & Benefits

    • Forms a permanent waterproofing barrier
    • Waterproofs cement repair putty
    • Can be used on above or below ground applications
    • Can be used on interior or exterior applications

    Ideal For

    • Fish ponds
    • Weeping surfaces
    • Concrete water tanks
    • Septic tanks
    • Retaining walls
    • Concrete floors
    • Waterproofing admix
    • Renders above/below ground level
    • Potable drinking water

    Technical

    Waterproofing Level


    Note: Use GP Portland cement only

    Equivalent or similar cements are not suitable.
     
    Apply: Brush
     
    Coverage: 1L = 16m2
     
    Apply: 3 Coats
     
    Drying Time: 24 hours

    Tips

    • For fish ponds, water must be neutralised and stabilised before replacing or introducing fish. For water tanks flush and rinse well 24 hours prior to filling with water.
    • Do not add any clay or lime to the mix.
    • Do not apply if temperature is below 8?C. If weather is hot apply during cooler
    • Stir and mix well before and during use.
    • Apply in thin coats. Heavy coating may cause the surface to crack or become powdery.
    • Mist coat the surface every half an hour after application of every coat, up to 4 hours.

    Clean - Up

    Cleaning is as easy as 1-2-3!

    • Wash your equipment in fresh water with a drop of detergent.
    • Rinse in clean water.
    • Seal washings and unwanted leftovers and dispose of responsibly.

    Safety

    • Store out of reach of children.
    • Skin: wash the area well with running water.
    • Eyes: flush the eye with running water for several minutes, contact your doctor.
    • Breathing: use in a well ventilated area; when spraying, use a suitable respirator
    • Swallowed: drink water, do not induce vomiting and contact your doctor or the Poison Information Centre on 13 11 26

    Projects

    • Silasec as a Waterproof Additive
    • Silasec Water Proof Cement Paint

    Data Sheets

    MSDS - Bondall Silasec

    Data Sheet - Bondall Silasec