View cart
Shopping cart is empty.
Phone Lyndons hardwaer suppies

LOCATE YOUR NEAREST STORE

Phone, fax or shop online

 

PaveX Crack A Joint

This catalog has no sub-catalogs.
  • PaveX Crack A Joint

    Choose An attribute

    Size

    Item Tags: Pavex

    Part No.
    Manufacturer
    Pack Size

    Qty

     

    Product Name: PaveX™ Crack-A-Joint™
    Main Image: Combined CAJ (Plain) - Perspective 1.jpg (or png)
    Available Sizes: CAJ25 – PaveX™ Crack-A-Joint™ 25mm x 3m CAJ38 - PaveX™ Crack-A-Joint™ 38mm x 3m
    Overview: As an alternative to traditional saw cutting and tooled joints, PaveX™ Crack-A-Joint™ induces a controlled crack to the full depth of the concrete. Available in profile heights of 25mm and 38mm, PaveX™ Crack-A-Joint™ initiates a crack in slabs between 75mm and 150mm in depth.

     

     

    Extruded in UV stabilised uPVC to 3 metres in length, PaveX™ Crack-A-Joint™ is also suitable for use in pavements in chemically corrosive environments including chlorinated or salt-water swimming pool surrounds and coastal environments.

     

    PaveX™ Crack-A-Joint™ complies with the requirements of AS 3727.1:2016 Residential Pavements.

    Typical Uses: Weakened plane joints in footpaths, bicycle paths, driveways and urban streetscapes.
    Features:
    • Safety: Reduces the risk of cuts and abrasions caused by sharp edges on traditional steel profiles.
    • Immediately initiates a contraction joint in the slab when placed in freshly poured wet concrete.
    • Finish the slab the same day. There is no need to return the next day for saw-cutting.
    • PaveX™ Crack-A-Joint™ will butt up to any given edge, including columns.
    • PaveX ™ Crack-A-Joint™ can be placed quickly, with precision.
    • Lightweight and easy to carry around the job site.
    • Profile heights of 25mm and 38mm initiate controlled cracks in slabs between 75mm and 150mm in depth.
    • Available in 3m standard lengths.
    • Corrosion-Free: PaveX™ Crack-A-Joint™ is extruded from UV stabilised uPVC.
    • Reduces the risk of early shrinkage cracking, producing architecturally aesthetic pavements.
    • No joint filler required: The edge of the PaveX™ Crack-A-Joint™ profile acts as a support for the edge of the concrete and stops unsightly fraying and spalling.
    • Unique profile compliments aggregate interlock which facilitates load transfer.
    • PaveX™ Crack-A-Joint™ provides a low-noise transition over weakened plane joints.
    • Optional: PaveX™ Crack-A-Joint™ Rip-A-Strip Capping and Clip-on Joiners are sold separately.
    Relevant Standards: Australian Standard AS 3727.1:2016 Residential Pavements.