SikaDur 42/52 3KG KIT
This catalog has no sub-catalogs. |
-
Sikadur-42 HP is a three-component, multi purpose, moisture tolerant, epoxy grouting system. It can be used for grouting applications up to 150 mm in depth, please see technical data
Item Tags:
Part No.SIKA068ManufacturerSikaPack SizeKitQty
Sikadur® 42 HP
Sikadur-42 HP is a three-component, multi purpose, moisture tolerant, epoxy grouting system. It can be used for grouting applications up to 150 mm in depth, please see technical data.
Use
High-strength grouting and fixing of:
- Starter bars
- Anchors
- Fasteners
- Tie rods
- Crash barrier posts
- Fence and railing posts
Under-grouting and bedding of:
- Base plates
- Machine bases, seat base-plates for light and heavy machinery including heavy impact and vibratory machinery, reciprocating engines, compressors, pumps, presses, etc
- Bridge bearings
- Mechanical joints (i.e. road/bridge/deck types, etc.)
Sleeper-less, direct rail fixing:
- Crane tracks
- Light rail and permanent way in tunnels
- Light rail and permanent way over bridges
Characteristics and Advantages
- High early strength
- Ready-to-mix, pre-batched units
- Moisture tolerant
- Non-shrink
- Corrosion and chemically resistant
- Stress and impact resistant
- High compressive strength
- High vibration resistance
- Low coefficient of thermal expansion
Colour
Concrete GreyPackaging
12 kg (A+B+C): pre-batched unit
Component A - Resin 1.67 kg
Component B - Hardener 0.33 kg
Component C (Sikadur®-514) 10kg bag 144 kg (A+B+C): Bulk packaging
Component A - Resin 20.04 kg
Component B - Hardener 3.96 kg
Component C - (Sikadur®-514) 10 kg bag x 12
Product Data Sheet
Sikadur 42 HP PDSSikadur® 52
Sikadur-52 is a low viscosity, free flowing and fast curing injection resin and primer/coating based on a 2 component solvent free epoxy resin; ideally suited to a wide range of building and civil engineering applications where highly penetrative material is required. It is available in two grades, Normal and Long Pot life for moderate and high ambient temperatures respectively.
Use
Sikadur-52 may be used to inject and fill cracks between 0.2 - 5 mm wide in a wide variety of constructions applications. Sikadur-52 does not shrink on curing and forms a rigid, high strength product which exhibits excellent adhesion to most construction materials enabling the restoration of structural adequacy to columns, beams, foundations, decks and water retaining structures.
Characteristics and Advantages
- Shrink free
- Insensitive to moisture during application, cure or whilst in service
- Applicable over wide temperature range
- Low viscosity
- Excellent adhesion to most building materials even when damp
- Proven in service
- High tensile and flexural strength
- Supplied in factory proportioned units
- High early strength
- Chemical resistant